# Dark Theme Manager

**URL:** <https://clarionhub.com/t/dark-theme-manager/9295>\
**Category:** questions\
**Tags:** c11\
**Created:** [August 12, 2026, 1:09pm UTC](https://clarionhub.com/t/dark-theme-manager/9295 "2026-08-12T13:09:36Z")\
**Posts on this page:** 12\
**Page:** 1

<div class="post-metadata">

**Author:** ![Werner](https://clarionhub.com/user_avatar/clarionhub.com/werner/32/1638_2.png) [@Werner](https://clarionhub.com/u/Werner)\
**Post date:** [August 12, 2026, 1:09pm UTC](https://clarionhub.com/t/dark-theme-manager/9295/1 "2026-08-12T13:09:36Z")

</div>

I have created a theme manager for use in Access. It uses two tables, one with different themes and their colors for various controls and one with user settings and preferred themes. It is not just limited to dark and light, but unlimited themes. This works fine in Access.

I have tried to convert this to Clarion (11) and it uses two procedures: LoadTheme and ApplyTheme. LoadTheme complies fines, but ApplyTheme will not. It starts to complain already at the start with ‘wnd’ . Can somebody give me a suggestion on how to proceed. I have used Copilot to build the procedures, but must admit it is not great with Clarion. Good with Access and VBA. Not with Clarion. The two procedures:

````clarion
LoadTheme PROCEDURE ! Declare Procedure

CODE
  ! Finn aktivt tema i AppUserSettings (SettingID = 1)
  CLEAR(AppUserSettings)
  AppUserSettings.SettingID = 1
  GET(AppUserSettings, AppUserSettings.SettingID)

  IF ERRORCODE()
     MESSAGE('AppUserSettings: Fant ikke aktivt tema.')
     RETURN
  END

  ! Hent selve temaet fra AppTheme
  CLEAR(AppTheme)
  AppTheme.ThemeID = AppUserSettings.ThemeID
  GET(AppTheme, AppTheme.ThemeID)

  IF ERRORCODE()
     MESSAGE('AppTheme: Fant ikke tema med ID ' & AppUserSettings.ThemeID)
     RETURN
  END

  ! Kopier alle felter inn i ThemeRecord
  ThemeRecord.ThemeID = AppTheme.ThemeID
  ThemeRecord.ThemeName = AppTheme.ThemeName
  ThemeRecord.PrimaryColor = AppTheme.PrimaryColor
  ThemeRecord.SecondaryColor = AppTheme.SecondaryColor
  ThemeRecord.BackgroundColor = AppTheme.BackgroundColor
  ThemeRecord.FormBackColor = AppTheme.FormBackColor
  ThemeRecord.AccentColor = AppTheme.AccentColor
  ThemeRecord.TextBoxBackColor = AppTheme.TextBoxBackColor
  ThemeRecord.TextBoxForeColor = AppTheme.TextBoxForeColor
  ThemeRecord.LabelForeColor = AppTheme.LabelForeColor
  ThemeRecord.LabelBackColor = AppTheme.LabelBackColor
  ThemeRecord.ButtonBackColor = AppTheme.ButtonBackColor
  ThemeRecord.ButtonHoverColor = AppTheme.ButtonHoverColor
  ThemeRecord.ButtonPressedColor = AppTheme.ButtonPressedColor
  ThemeRecord.ButtonWidth = AppTheme.ButtonWidth
  ThemeRecord.ButtonHeight = AppTheme.ButtonHeight
  ThemeRecord.FontName = AppTheme.FontName
  ThemeRecord.FontSizeLabel = AppTheme.FontSizeLabel
  ThemeRecord.FontSizeTextBox = AppTheme.FontSizeTextBox
  ThemeRecord.FontSizeHeader = AppTheme.FontSizeHeader
  ThemeRecord.MarginOuter = AppTheme.MarginOuter
  ThemeRecord.MarginInner = AppTheme.MarginInner
  ThemeRecord.TabActiveColor = AppTheme.TabActiveColor
  ThemeRecord.TabInactiveColor = AppTheme.TabInactiveColor
  ThemeRecord.DetailBackColor = AppTheme.DetailBackColor
  ThemeRecord.DetailAlternateBackColor = AppTheme.DetailAlternateBackColor
  ThemeRecord.HeaderBackColor = AppTheme.HeaderBackColor
  ThemeRecord.FooterBackColor = AppTheme.FooterBackColor
  ThemeRecord.HeaderLabelBackColor = AppTheme.HeaderLabelBackColor
  ThemeRecord.FooterLabelBackColor = AppTheme.FooterLabelBackColor
  ThemeRecord.DetailLabelBackColor = AppTheme.DetailLabelBackColor
  ThemeRecord.HeaderLabelForeColor = AppTheme.HeaderLabelForeColor
  ThemeRecord.FooterLabelForeColor = AppTheme.FooterLabelForeColor
  ThemeRecord.DetailLabelForeColor = AppTheme.DetailLabelForeColor

  RETURN

```LoadTheme PROCEDURE ! Declare Procedure

CODE

  ! Finn aktivt tema i AppUserSettings (SettingID = 1)

  CLEAR(AppUserSettings)

  AppUserSettings.SettingID = 1

  GET(AppUserSettings, AppUserSettings.SettingID)

  IF ERRORCODE()

     MESSAGE('AppUserSettings: Fant ikke aktivt tema.')

     RETURN

  END

  ! Hent selve temaet fra AppTheme

  CLEAR(AppTheme)

  AppTheme.ThemeID = AppUserSettings.ThemeID

  GET(AppTheme, AppTheme.ThemeID)

  IF ERRORCODE()

     MESSAGE('AppTheme: Fant ikke tema med ID ' & AppUserSettings.ThemeID)

     RETURN

  END

  ! Kopier alle felter inn i ThemeRecord

  ThemeRecord.ThemeID = AppTheme.ThemeID

  ThemeRecord.ThemeName = AppTheme.ThemeName

  ThemeRecord.PrimaryColor = AppTheme.PrimaryColor

  ThemeRecord.SecondaryColor = AppTheme.SecondaryColor

  ThemeRecord.BackgroundColor = AppTheme.BackgroundColor

  ThemeRecord.FormBackColor = AppTheme.FormBackColor

  ThemeRecord.AccentColor = AppTheme.AccentColor

  ThemeRecord.TextBoxBackColor = AppTheme.TextBoxBackColor

  ThemeRecord.TextBoxForeColor = AppTheme.TextBoxForeColor

  ThemeRecord.LabelForeColor = AppTheme.LabelForeColor

  ThemeRecord.LabelBackColor = AppTheme.LabelBackColor

  ThemeRecord.ButtonBackColor = AppTheme.ButtonBackColor

  ThemeRecord.ButtonHoverColor = AppTheme.ButtonHoverColor

  ThemeRecord.ButtonPressedColor = AppTheme.ButtonPressedColor

  ThemeRecord.ButtonWidth = AppTheme.ButtonWidth

  ThemeRecord.ButtonHeight = AppTheme.ButtonHeight

  ThemeRecord.FontName = AppTheme.FontName

  ThemeRecord.FontSizeLabel = AppTheme.FontSizeLabel

  ThemeRecord.FontSizeTextBox = AppTheme.FontSizeTextBox

  ThemeRecord.FontSizeHeader = AppTheme.FontSizeHeader

  ThemeRecord.MarginOuter = AppTheme.MarginOuter

  ThemeRecord.MarginInner = AppTheme.MarginInner

  ThemeRecord.TabActiveColor = AppTheme.TabActiveColor

  ThemeRecord.TabInactiveColor = AppTheme.TabInactiveColor

  ThemeRecord.DetailBackColor = AppTheme.DetailBackColor

  ThemeRecord.DetailAlternateBackColor = AppTheme.DetailAlternateBackColor

  ThemeRecord.HeaderBackColor = AppTheme.HeaderBackColor

  ThemeRecord.FooterBackColor = AppTheme.FooterBackColor

  ThemeRecord.HeaderLabelBackColor = AppTheme.HeaderLabelBackColor

  ThemeRecord.FooterLabelBackColor = AppTheme.FooterLabelBackColor

  ThemeRecord.DetailLabelBackColor = AppTheme.DetailLabelBackColor

  ThemeRecord.HeaderLabelForeColor = AppTheme.HeaderLabelForeColor

  ThemeRecord.FooterLabelForeColor = AppTheme.FooterLabelForeColor

  ThemeRecord.DetailLabelForeColor = AppTheme.DetailLabelForeColor

  RETURN

And the other procedure:

MEMBER()

INCLUDE('ABWINDOW.INC'),ONCE

                     MAP

ApplyTheme PROCEDURE(Wnd Window)

                     END

ApplyTheme PROCEDURE(Wnd WINDOW)

FieldNum LONG

CODE

  Wnd{PROP:Background} = ThemeRecord.BackgroundColor

  FieldNum = 0

  LOOP

    FieldNum = Wnd{PROP:NextField, FieldNum}

    IF FieldNum = 0 THEN BREAK.

    CASE FieldNum{PROP:Type}

    OF 1 ! Prompt

      FieldNum{PROP:Color} = ThemeRecord.LabelForeColor

      FieldNum{PROP:Background} = ThemeRecord.LabelBackColor

    OF 2 ! Entry

      FieldNum{PROP:Color} = ThemeRecord.TextBoxForeColor

      FieldNum{PROP:Background} = ThemeRecord.TextBoxBackColor

    OF 3 ! Button

      FieldNum{PROP:Color} = ThemeRecord.ButtonForeColor

      FieldNum{PROP:Background} = ThemeRecord.ButtonBackColor

    OF 7 ! List

      FieldNum{PROP:Color} = ThemeRecord.LabelForeColor

      FieldNum{PROP:Background} = ThemeRecord.DetailBackColor

      FieldNum{PROP:Alternate} = ThemeRecord.DetailAlternateBackColor

      FieldNum{PROP:HeaderBackColor} = ThemeRecord.HeaderBackColor

      FieldNum{PROP:HeaderTextColor} = ThemeRecord.HeaderLabelForeColor

      FieldNum{PROP:FooterBackColor} = ThemeRecord.FooterBackColor

      FieldNum{PROP:FooterTextColor} = ThemeRecord.FooterLabelForeColor

    OF 14 ! Tab

      FieldNum{PROP:Background} = ThemeRecord.TabInactiveColor

      IF FieldNum{PROP:Selected}

         FieldNum{PROP:Background} = ThemeRecord.TabActiveColor

      END

    END

  END
````

---

<div class="post-metadata">

**Author:** ![rjolda](https://clarionhub.com/letter_avatar_proxy/v4/letter/r/898d66/32.png) [@rjolda](https://clarionhub.com/u/rjolda)\
**Post date:** [August 12, 2026, 3:42pm UTC](https://clarionhub.com/t/dark-theme-manager/9295/2 "2026-08-12T15:42:43Z")

</div>

Hi Werner  
Load up THEMER APP ( NT Server number 88). This is used to play with and make your own themes. Play with the themes. There is a Dark theme in there.  
Ron

---

<div class="post-metadata">

**Author:** ![Mark\_Sarson](https://clarionhub.com/user_avatar/clarionhub.com/mark_sarson/32/6132_2.png) [@Mark\_Sarson](https://clarionhub.com/u/Mark_Sarson)\
**Post date:** [August 12, 2026, 5:21pm UTC](https://clarionhub.com/t/dark-theme-manager/9295/3 "2026-08-12T17:21:47Z")

</div>

Hi Ron,

Werner’s code is not for a NetTalk application, it’s a themer for desktop applications, and so NT themer wouldn’t be useful here.

Mark

---

<div class="post-metadata">

**Author:** ![MarkGoldberg](https://clarionhub.com/user_avatar/clarionhub.com/markgoldberg/32/1511_2.png) [@MarkGoldberg](https://clarionhub.com/u/MarkGoldberg)\
**Post date:** [August 12, 2026, 10:35pm UTC](https://clarionhub.com/t/dark-theme-manager/9295/4 "2026-08-12T22:35:33Z")

</div>

Hi Werner,

you wrote:

> **ApplyTheme**  **PROCEDURE** (Wnd _WINDOW_)

Clarion prototypes are in the opposite order than many languages, clarion expects  
(DataType ParameterLabel )

So you want  
`ApplyTheme PROCEDURE(*Window Wnd)`

* * *

Also FWIW, I would use the create:\* equates for the PROP:Type  
you may need to add an `INCLUDE('equates.clw'),ONCE`

```auto
CASE FieldNum{PROP:Type}   
  OF CREATE:BUTTON

```

* * *

I’m not sure of the data types of ThemeRecord and AppTheme  
but there’s a good chance you can make all of the assignments with 1 line of code  
either `ThemeRecord = AppTheme` or `ThemeRecord :=: AppTheme` the 2nd assignment is called a Deep Assign in clarion, it matches the fields in any order and makes assignments to matching labels, but if the structures are the same then the first simple assign is more efficient (not that you’d ever notice the difference)

* * *

one last thing, when using PROP:NextField, please be aware that pulldown menus and toolbars will be enumerated as well, you can easily identify them as they will have negative FieldNums (Field Equates)

---

<div class="post-metadata">

**Author:** ![jslarve](https://clarionhub.com/letter_avatar_proxy/v4/letter/j/e480ec/32.png) [@jslarve](https://clarionhub.com/u/jslarve)\
**Post date:** [August 13, 2026, 11:32am UTC](https://clarionhub.com/t/dark-theme-manager/9295/5 "2026-08-13T11:32:51Z")

</div>

> [@MarkGoldberg](#):
>
> you can easily identify them as they will have negative FieldNums

If the default FEQ assignment is used, that is.

---

<div class="post-metadata">

**Author:** ![Werner](https://clarionhub.com/user_avatar/clarionhub.com/werner/32/1638_2.png) [@Werner](https://clarionhub.com/u/Werner)\
**Post date:** [August 13, 2026, 6:56pm UTC](https://clarionhub.com/t/dark-theme-manager/9295/6 "2026-08-13T18:56:12Z")

</div>

Mark,  
thanks for your comments . The code now accepts the prototype for the procedure.

The code now looks as follows in included handwritten file ThemeModule.clw  
!====================================  
MEMBER()

INCLUDE(‘ABWINDOW.INC’),ONCE

```
                 MAP

```

ApplyTheme PROCEDURE(Window Wnd)  
END

ApplyTheme PROCEDURE(Window Wnd)

FieldNum LONG

CODE  
Wnd{PROP:Background} = ThemeRecord.BackgroundColor

FieldNum = 0  
LOOP  
FieldNum = Wnd{PROP:NextField, FieldNum}  
IF FieldNum = 0 THEN BREAK.

```
CASE FieldNum{PROP:Type}

OF 1 ! Prompt
  FieldNum{PROP:Color} = ThemeRecord.LabelForeColor
  FieldNum{PROP:Background} = ThemeRecord.LabelBackColor

```

!==============================================

The logic is like this: In the dictionary I have a tps file named AppTheme. In the Application I have a group named ThemeRecord. I use the LoadTheme procedure to load the data in the tps file into the group and the ApplyTheme to apply themecolors to the various types of control. In each window I will need to start the procedure ApplyTheme in Window Open (I think). The current problem is that in the LoadTheme procedure the procedure is not able to find identifier Themerecord and also error ‘Field not find: BackgroundColor’ (as an example).  
I am a bit surprised about this as it is a global group.  
Any suggestions?

---

<div class="post-metadata">

**Author:** ![CarlBarnes](https://clarionhub.com/user_avatar/clarionhub.com/carlbarnes/32/1859_2.png) [@CarlBarnes](https://clarionhub.com/u/CarlBarnes)\
**Post date:** [August 14, 2026, 2:48pm UTC](https://clarionhub.com/t/dark-theme-manager/9295/7 "2026-08-14T14:48:56Z")

</div>

> [@MarkGoldberg](#):
>
> pulldown menus and toolbars will be enumerated as well, you can easily identify them as they will have negative FieldNums (Field Equates)

`Feq{PROP:InToolbar}` is a good check.

For the Menus he is checking PROP:Type so can avoid the Menus & Items.

---

<div class="post-metadata">

**Author:** ![MarkGoldberg](https://clarionhub.com/user_avatar/clarionhub.com/markgoldberg/32/1511_2.png) [@MarkGoldberg](https://clarionhub.com/u/MarkGoldberg)\
**Post date:** [August 14, 2026, 4:40pm UTC](https://clarionhub.com/t/dark-theme-manager/9295/8 "2026-08-14T16:40:55Z")

</div>

Congratulations on fixing the prototype

Global data is NOT visible from modules that have an empty MEMBER() statement  
to see the global data you need to provide the global module `MEMBER('MyGlobalModule')`

* * *

Personally, I would write this as a class, which I’ll be happy to help you with if you’re interested  
The data would be held as properties. Which means you could then avoid needing to tie this code to a particular global module.

I see you’re doing an `INCLUDE('abWindow.inc'),ONCE`  
so, you might consider writing this as a derived window manager  
or more flexibly as a WIndowComponent

* * *

As a side note, posts are easier to read when source code is tagged to render as source code  
[New Clarion Syntax Highlighting on ClarionHub! - Announcements - ClarionHub](https://clarionhub.com/t/new-clarion-syntax-highlighting-on-clarionhub/7481)

---

<div class="post-metadata">

**Author:** ![Werner](https://clarionhub.com/user_avatar/clarionhub.com/werner/32/1638_2.png) [@Werner](https://clarionhub.com/u/Werner)\
**Post date:** [August 18, 2026, 11:42am UTC](https://clarionhub.com/t/dark-theme-manager/9295/9 "2026-08-18T11:42:36Z")

</div>

Mark,  
I have tried to create a class (together with copilot) , but it is not working. It consists mainly of ThemeClass.inc and ThemeClass.clw and it is to be implemented in a form as follows:

```clarion

!==================================
!Use in a form:
!INCLUDE('ThemeClass.inc'),ONCE
!==================================

!Embed point
!==================================
! Event:OpenWindow - Embed
! Theme ThemeClass
! Theme.LoadTheme(1)
! Theme.ApplyTheme(SELF.Window)
!==================================

```

The ThemeClass.inc code looks as follows:

```clarion
ThemeClass CLASS,TYPE

ThemeRecord GROUP
ThemeID LONG
ThemeName STRING(30)
PrimaryColor LONG
SecondaryColor LONG
BackgroundColor LONG
FormBackColor LONG
AccentColor LONG
TextBoxBackColor LONG
TextBoxForeColor LONG
LabelForeColor LONG
LabelBackColor LONG
ButtonForeColor LONG
ButtonBackColor LONG
ButtonHoverColor LONG
ButtonPressedColor LONG
ButtonWidth LONG
ButtonHeight LONG
FontName STRING(50)
FontSizeLabel LONG
FontSizeTextBox LONG
FontSizeHeader LONG
MarginOuter LONG
MarginInner LONG
TabActiveColor LONG
TabInactiveColor LONG
DetailBackColor LONG
DetailAlternateBackColor LONG
HeaderBackColor LONG
FooterBackColor LONG
HeaderLabelBackColor LONG
FooterLabelBackColor LONG
DetailLabelBackColor LONG
HeaderLabelForeColor LONG
FooterLabelForeColor LONG
DetailLabelForeColor LONG
                        END

ApplyTheme PROCEDURE(Window Wnd)
LoadTheme PROCEDURE(LONG ThemeID)

                      END
!The ThemeClass.clw look as follows:

                     MEMBER()

INCLUDE('ThemeClass.inc'),ONCE

AppTheme FILE,DRIVER('TPS'),NAME('AppTheme.tps'),PRE(TM)
Record RECORD
  ThemeID LONG
  ThemeName STRING(30)
  PrimaryColor LONG
  SecondaryColor LONG
  BackgroundColor LONG
  FormBackColor LONG
  AccentColor LONG
  TextBoxBackColor LONG
  TextBoxForeColor LONG
  LabelForeColor LONG
  LabelBackColor LONG
  ButtonForeColor LONG
  ButtonBackColor LONG
  ButtonHoverColor LONG
  ButtonPressedColor LONG
  ButtonWidth LONG
  ButtonHeight LONG
  FontName STRING(50)
  FontSizeLabel LONG
  FontSizeTextBox LONG
  FontSizeHeader LONG
  MarginOuter LONG
  MarginInner LONG
  TabActiveColor LONG
  TabInactiveColor LONG
  DetailBackColor LONG
  DetailAlternateBackColor LONG
  HeaderBackColor LONG
  FooterBackColor LONG
  HeaderLabelBackColor LONG
  FooterLabelBackColor LONG
  DetailLabelBackColor LONG
  HeaderLabelForeColor LONG
  FooterLabelForeColor LONG
  DetailLabelForeColor LONG
         END
KEY(KeyPrimary,ThemeID),PRIMARY
       END
!----------------------------------------------------------
! LoadTheme: short version

!----------------------------------------------------------
ThemeClass.LoadTheme PROCEDURE(LONG pThemeID)
CODE
  CLEAR(SELF.ThemeRecord)

  OPEN(AppTheme)
  IF ERRORCODE() THEN RETURN.

  CLEAR(AppTheme)
  ATH:ThemeID = pThemeID
  GET(AppTheme,ThemeKey)

  IF ERRORCODE() THEN
    CLOSE(AppTheme)
    RETURN
  END

  SELF.ThemeRecord.ThemeID = TM:ThemeID
  SELF.ThemeRecord.ThemeName = TM:ThemeName
  SELF.ThemeRecord.PrimaryColor = TM:PrimaryColor
  SELF.ThemeRecord.SecondaryColor = TM:SecondaryColor
  SELF.ThemeRecord.BackgroundColor = TM:BackgroundColor
  SELF.ThemeRecord.FormBackColor = TM:FormBackColor
  SELF.ThemeRecord.AccentColor = TM:AccentColor
  SELF.ThemeRecord.TextBoxBackColor = TM:TextBoxBackColor
  SELF.ThemeRecord.TextBoxForeColor = TM:TextBoxForeColor
  SELF.ThemeRecord.LabelForeColor = TM:LabelForeColor
  SELF.ThemeRecord.LabelBackColor = TM:LabelBackColor
  SELF.ThemeRecord.ButtonForeColor = TM:ButtonForeColor
  SELF.ThemeRecord.ButtonBackColor = TM:ButtonBackColor
  SELF.ThemeRecord.ButtonHoverColor = TM:ButtonHoverColor
  SELF.ThemeRecord.ButtonPressedColor = TM:ButtonPressedColor
  SELF.ThemeRecord.ButtonWidth = TM:ButtonWidth
  SELF.ThemeRecord.ButtonHeight = TM:ButtonHeight
  SELF.ThemeRecord.FontName = TM:FontName
  SELF.ThemeRecord.FontSizeLabel = TM:FontSizeLabel
  SELF.ThemeRecord.FontSizeTextBox = TM:FontSizeTextBox
  SELF.ThemeRecord.FontSizeHeader = TM:FontSizeHeader
  SELF.ThemeRecord.MarginOuter = TM:MarginOuter
  SELF.ThemeRecord.MarginInner = TM:MarginInner
  SELF.ThemeRecord.TabActiveColor = TM:TabActiveColor
  SELF.ThemeRecord.TabInactiveColor = TM:TabInactiveColor
  SELF.ThemeRecord.DetailBackColor = TM:DetailBackColor
  SELF.ThemeRecord.DetailAlternateBackColor = TM:DetailAlternateBackColor
  SELF.ThemeRecord.HeaderBackColor = TM:HeaderBackColor
  SELF.ThemeRecord.FooterBackColor = TM:FooterBackColor
  SELF.ThemeRecord.HeaderLabelBackColor = TM:HeaderLabelBackColor
  SELF.ThemeRecord.FooterLabelBackColor = TM:FooterLabelBackColor
  SELF.ThemeRecord.DetailLabelBackColor = TM:DetailLabelBackColor
  SELF.ThemeRecord.HeaderLabelForeColor = TM:HeaderLabelForeColor
  SELF.ThemeRecord.FooterLabelForeColor = TM:FooterLabelForeColor
  SELF.ThemeRecord.DetailLabelForeColor = TM:DetailLabelForeColor

  CLOSE(AppTheme)
!----------------------------------------------------------
! ApplyTheme: colors windows and controls
!----------------------------------------------------------
ThemeClass.ApplyTheme PROCEDURE(Window Wnd)
FieldNum LONG
CtrlType LONG

CODE
  Wnd{PROP:Background} = SELF.ThemeRecord.BackgroundColor

  FieldNum = 0
  LOOP
    FieldNum = Wnd{PROP:NextField, FieldNum}
    IF FieldNum = 0 THEN BREAK.

    CtrlType = Wnd{PROP:Type, FieldNum}

    CASE CtrlType

    OF CREATE:Label
      Wnd{PROP:TextColor, FieldNum} = SELF.ThemeRecord.LabelForeColor
      Wnd{PROP:BackColor, FieldNum} = SELF.ThemeRecord.LabelBackColor

    OF CREATE:Entry
      Wnd{PROP:TextColor, FieldNum} = SELF.ThemeRecord.TextBoxForeColor
      Wnd{PROP:BackColor, FieldNum} = SELF.ThemeRecord.TextBoxBackColor

    OF CREATE:Button
      Wnd{PROP:TextColor, FieldNum} = SELF.ThemeRecord.ButtonForeColor
      Wnd{PROP:BackColor, FieldNum} = SELF.ThemeRecord.ButtonBackColor

    END
  END

```

I cannot get it to work as it is and I feel that using Copilot is sometimes like to going down the rabbithole. It start nice and easy with a inc file and a clw file, and whence it doesn’t work it comes up with all these fancy explanations why.

Any comments to the code would be welcome as I have some applications I would like to give the possibility to use alternative color schemes.

Brgds  
Werner

---

<div class="post-metadata">

**Author:** ![MarkGoldberg](https://clarionhub.com/user_avatar/clarionhub.com/markgoldberg/32/1511_2.png) [@MarkGoldberg](https://clarionhub.com/u/MarkGoldberg)\
**Post date:** [August 18, 2026, 7:15pm UTC](https://clarionhub.com/t/dark-theme-manager/9295/10 "2026-08-18T19:15:49Z")

</div>

> [@Werner](#):
>
> Mark,  
> I have tried to create a class (together with copilot) , but it is not working. It consists mainly of ThemeClass.inc and ThemeClass.clw and it is to be implemented in a form as follows:

**Congrats on getting your first class this far.**

This reply is just about Classes in general vs. this particular example  
but I’ll use your class name and filenames to talk about what needs to be done.

As you mentioned, the class is split between two files  
**ThemeClass.inc** and **ThemeClass.clw**

* * *

For the .INC CoPilot wrote  
`ThemeClass CLASS,TYPE`

You’ll want  
`ThemeClass CLASS,TYPE,MODULE('ThemeClass.clw'),LINK('ThemeClass.clw)`

This tells the compiler that any methods will appear in `ThemeClass.clw` and please compile `ThemeClass.clw` too, you do NOT need to add `ThemeClass.clw` to your project (.CWProj)

Note: if you want to compile the class in a DLL, and use it in other DLLs or the EXE then you’ll want to use the 2nd argument of the Link attribute, and add a `,DLL(YadaDllMode)` to make the same code compile correctly in both the DLL and EXE where YadaDllMode is a project define.

Here’s a similar line for ABC’s WindowManager

```auto
WindowManager CLASS,TYPE,MODULE('ABWINDOW.CLW'),LINK('ABWINDOW.CLW',_ABCLinkMode_),DLL(_ABCDllMode_)     

```

As you mentioned in your comment, the idea is to be able to write  
`INCLUDE('ThemeClass.inc'),ONCE`  
Now that the class is written to use a ,MODULE attribute  
the `INCLUDE('ThemeClass.inc'),ONCE` **must** appear at the global scope (recommended) or a module scope. Otherwise your program will GPF at runtime when you first “touch” the class, even though it compiles just fine (at least that was the case the last I checked)

* * *

In the .CLW CoPilot failed to add a MAP;END  
It’s often important to add one, even when the MAP is empty

```auto
 MAP
 END

```

because while the map looks empty, it’s treated as follows.

```auto
 MAP
    INCLUDE('builtins.clw'),once
 END

```

Giving the compiler important prototypes for quite a few commands that we consider part of the Run-Time Library (RTL)

* * *

If you’re not familiar with the ,TYPE attribute  
think of it as a notation for telling the compiler about a new kind of thing  
But do NOT allocate any RAM for it

many classes are written with a ,TYPE attribute  
and then are instantiated (allocated ram, and run the .construct if present) where they’re needed.

You may find it useful to create `GROUP,TYPE` and `QUEUE,TYPE`

---

<div class="post-metadata">

**Author:** ![MarkGoldberg](https://clarionhub.com/user_avatar/clarionhub.com/markgoldberg/32/1511_2.png) [@MarkGoldberg](https://clarionhub.com/u/MarkGoldberg)\
**Post date:** [August 18, 2026, 7:47pm UTC](https://clarionhub.com/t/dark-theme-manager/9295/11 "2026-08-18T19:47:43Z")

</div>

> [@Werner](#):
>
> I have tried to create a class (together with copilot) , but it is not working.

This Reply talks about the specifics of the initial source you posted above  
I’ll try to focus on just getting things working vs. ways to enhance the class  
_I tried, but I just had mention some changes 🙂_

I doubt the posted code compiles

File declaration is off

1. `,DRIVER('TPS')` should be `,DRIVER('TopSpeed')`

2. The field labels in the file, need to be in the first column  
this is a requirement for all labels in clarion

3. The Key components must use the Prefix  
_as much as I wish that weren’t the case_

4. The Key needs a label

5. I’ve never seen the KEY below the record, that _might_ be ok, but I don’t see an advantage to placing it after the record

Note: there is an assumption that the Topsped file driver has been added this project, there are ways to add it into the INC or CLW - but let’s defer that “trick” for now

I also noticed a mix of prefixes in the code  
The file is declared with `,PRE(TM)` but `ATH:ThemeID` is used ThemeClass.LoadTheme before the `GET`

Side note: I would either have a method that’s called when there’s an error in .LoadTheme, and/or have it `RETURN ERRORCODE()` so the calling code would have a chance to handle problems

* * *

.ApplyTheme has needs to correct the property syntax

`Wnd{PROP:TextColor, FieldNum} = SELF.ThemeRecord.LabelForeColor`  
should be  
`FIeldNum{PROP:TextColor, FieldNum} = SELF.ThemeRecord.LabelForeColor`  
or if you prefer  
`Wnd $ FieldNum{PROP:TextColor, FieldNum} = SELF.ThemeRecord.LabelForeColor`

Assuming the passed window is the current Target (which is likely)  
then the two places where `Wnd{PROP:` is correct  
`Wnd{PROP:Background} = SELF.ThemeRecord.BackgroundColor`  
`FieldNum = Wnd{PROP:NextField, FieldNum}`

the `Wnd` in `Wnd{PROP:` could be replaced with `0`  
as in `0{PROP:NextField, FieldNum}`

So there’s no need to pass the Window into ApplyTheme

* * *

> [@Werner](#):
>
> ```auto
> !==================================
> !Use in a form:
> !INCLUDE('ThemeClass.inc'),ONCE
> !==================================
> 
> !Embed point
> !==================================
> ! Event:OpenWindow - Embed
> ! Theme ThemeClass
> ! Theme.LoadTheme(1)
> ! Theme.ApplyTheme(SELF.Window)
> !==================================
> 
> ```

Assuming that all windows will using the same ThemeID  
then I would move the `include` to the global scope  
and just call .LoadTheme( n ) once at program startup

There are a few things to work through if you want to support changing the theme or selecting a different theme when there are windows that are open

You will need to call .ApplyTheme after you open a window

* * *

Later, after we have this functional as a class  
Then I’d like to explore some ways it can be improved upon

---

<div class="post-metadata">

**Author:** ![Julian](https://clarionhub.com/letter_avatar_proxy/v4/letter/j/74df32/32.png) [@Julian](https://clarionhub.com/u/Julian)\
**Post date:** [August 19, 2026, 6:01pm UTC](https://clarionhub.com/t/dark-theme-manager/9295/12 "2026-08-19T18:01:05Z")

</div>

Good feedback.  
FYI: I often use FILE declarations without a prefix hence the keys don’t have a prefix either.
